+91 9889-158-158

 

info@multitechscientificsolution.com

Auto Labeling Machine

S.No.

Description

 

 

 

 

 

      Automatic Continuous Roll-Feed Labeling Machine for wrap around label

 

 

      application on the bottles With hot-melt glue. With PLC control & Touch-Screen

 

 

      Operating panel.

 

1.

      One set of Change parts required for Each additional size of bottles.

 

 

  • Vacuum Drum

 

 

  • Bottle In-feed Star

 

 

  • Label Roll-on press – Pad

 

                                  Cap.

  3600 BPH

 

 

 

Technical Details of Automatic Continuous Roll-feed Labeling machine:

 

Construction Details

 

The continuous label roll-feed labeling machine is a fully automatic machine with electro pneumatic Controls. The base, label cutter assembly and glue assembly of the machine is made of Mild Steel and Alloy steels with duly painted / hard chromed. The conveyor, which is passing through the machine, is made of S.S.304 and chain is made of thermoplastic.

The shafts, column assembly and star housings are made of stainless steel. All Guides and stars are made of S.S.304, UHMWPE, and Nylon. The machine is covered with S.S.304 frame and acrylic sheets work. The machine operation is controlled by Siemens Make PLC / Touch Screen and speed is controlled by Siemens make Variable frequency drive.

 

 

Operation

 

The label roll is to be installed on the rotary drum. The label reel is routed through its track to the rotary label cutter assembly through the feed roller. The length of the label is controlled by PLC, with the help of Color photo-cell, sensing the “I” mark on the label. Then the label length is cut by the label cutter assembly. The label is then transferred to the vacuum drum by air pressure and vacuum system and the label is held firmly at vacuum drum. During the rotation the label takes the hot melt glue from the glue drum on its leading edge and trailing edge. The hot melt glue is transferred by the pump, mounted on the glue heating tank. The bottles are transferred by the in feed star and positioned to the rotary vacuum drum. The bottle starts rotating, when comes in contact with the drum and the label is rolled on to the bottle against the pressure of roll-on press pad. The bottles are then transferred to the exit of the machine by the conveyor system. All the movements are controlled by PLC and electro-pneumatic controls.

 

Technical Details :

Capacity: 3000 to 9000 Bottles per hr.

Size of the bottle: 0.2 L. To 2.0 L. Bottles, with change parts for each Additional size, with extra cost.

Air Required: 300 Ltr. per minute at 5 kg/cm2 pressure Conveyor working height: 1050 + - 50 mm

Size (L X B X H) : 4100 X 1600 X 2000 mm Total Electrical Power : 5 K.W.

Following Set of change parts is required for each additional size of bottle, depending upon the diameter & height of bottle with following cost:

 

In feed star and guide set

Label feed roller

Label Roll-on press pad

Vacuum Drum

(One set is supplied with the machine)


Copyright @ 2020 Environmental warriors water & waste water solution. All rights reserved.